- Messages
- 6,157
Anyone been to one of these this one's playing up ??
- Thread starter king of pipes
- Start date
- Replies 5
- Views 1K
- alpha heat heat only
Discuss Alpha 24cdr heat only in the Gas Engineers Forum area at PlumbersForums.net
- Messages
- 34,372
- Solutions
- 2
Sorry vid not working my end
- Messages
- 6,157
Yeah mate can't seem to get it to open on here, the boiler sound like a machine gun ?? Not going to fault eithier which is worrying . Regards kop
- Messages
- 34,372
- Solutions
- 2
Do they have a bearing plate like the Worcester’s ?
Or maybe fan bearings
Or maybe fan bearings
- Messages
- 6,157
It's intermittent Shaun I'm not sure it is the boiler ? I have a suspicion its to do with the incoming water pressure the property is near a water tower and the pressure is 6 bar at night , the pre plumbed unvented cylinder doesn't look right either ?
Attachments
@Dan -- None of the videos or pictures posted recently are opening correctly for me. I see the thumbnail, and mouse-overing shows the size and number of views, but mouse-downing doesn't open the file.
Reply to Alpha 24cdr heat only in the Gas Engineers Forum area at PlumbersForums.net
Similar plumbing topics
Hello, I have just had my 15year old Grundfos UPS 15 50 replaced with an Alpha 1 and the Alpha 1 seems quite a bit noisier than the the old one,
I...
Hi, I note that the Grundfos Alpha 2 requires a special plug to connect the electric wiring. Are those plugs reusable if rewiring is needed...
Hi we have a Alpha 2 15-60-130 central heating pump fitted. We need a bit more heat from 12 rads. I’m confused about the settings as the Auto...
Hello, my Mothers heating failed in the recent UK cold snap. I found the pump was stuck. I have a question about pump orientation. The...
Hi All,
Looking for a recommendation for a heat only boiler to replace my 30yrs old ideal boiler.
Any makes you would recommend and any to avoid...
