Search the forum,

Alien Covenant has anyone seen?

Post new thread

Discuss Alien Covenant has anyone seen? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

Phil

Plumbers Arms member
Plumber
Messages
4,240
Has anyone seen this? We saw it last night and have to say spent the whole film waiting for something to happen. As a hardcore fan of the Alien films I was totally unimpressed and I actualy like the much slated Alien 3.
 
went to see it with my nephew i thought it was ok but nothing new and also left us with an ending that means there will be another in the series
 
yes...for me I'm not really bothered about seeing anything new I just want a good Alien film like 1,2,3 and 4.
 
I don't think any new Alien films will ever beat Aliens for me :) Saw Covenant and it was ok, probably rate it 7/10. No where near as good as the original films though but better than Prometheus which I thought was rubbish!
 
Prometheus was a bit dull but for me I prefer it over Covenant.
 
For me Alien is still so hard to beat..... especially with the John Hurt scene ....regards Turnpin:)
 
Status
Not open for further replies.

Reply to Alien Covenant has anyone seen? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
140
Lou
Lou
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Chuck
C
M
Unvented discharge at high level current regs
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I have just looked back through the regs this seems to have changed and it isn't mentioned now. It now mentions if at high level it should be discharged...
Replies
11
Views
267
Matt0029
M
C
How to identify dripping tap.
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
340
Timmy D
T
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
201
SimonG
SimonG
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Electrical News
DIY Advice
Tile Cutters
Tiling Advice
UK Tiling News
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock