ADVISE PLEASE - What replacement boiler for Ferroli DOMIcompact F24B ?

[bilabonic]

Hi All

I have a Ferroli DOMIcompact F24B and it is nothing but trouble, i have had a new PCB fitted, new preesure gauge, new pump and it is not working AGAIN due to pump broken again !!!

The Engineer has disconnected the pump so i only have HW, he also stated there is very small leak on Heat Exchanger (he did show me tiny bit of rust on backplate of the boiler ?)

I have had enough the Ferroli and need something reliable for winter....

I have asked for a price of a total replacement boiler and wanted a Baxi DUO TEC 24 or 28E as he has fitted on of these at my parents and it has been brilliant PLUS a 7 year warranty !!

He has stated that since the FLUE exits vertically through the roof (it goes through ceiling for 1m then 45deg for 1m the vertical again up through tiles/roof), it alsi has a 'support bracket midway).

I would also like to add ALL of the flue is less than 1 year old as it was all replaced when i had a new roof/Local Gov grant.

He has stated a BAXI can NOT be fitted due to the flue being the wrong size and is getting back to me later wit a 'suitable boiler' which will most probably be ANOTHER Ferroli or if i want a BAXI i would have to have ALL the flue replaced as well (expensive!!!)

Is this true guys ? What are my options here ?? What would you recommend???

Thanks in advance.

Cheers

 

[Harvest Fields]

In theory if cleaned and inhb installed there's no need for a filter but it's worth a 100 just for peace of mind

Warrenty ok with no filter aslong as system is cleaned / clean

The first thing they do now from what I am told is a water check? Not sure it will be clean enough in 2 hours?

 

[Harvest Fields]

Don't need to be part p unless your fitting the fused spur from that were fine to wire

Jumped the gun a bit there. Sorry. My bad. Forgot that Baxi have the drop down pcb and seperate combustion cover

 

[bilabonic]

Yea i just checked with filter, does not need one for warranty, i have a Magnatec spare somewhere as well !!

 

[ShaunCorbs]

The first thing they do now from what I am told is a water check? Not sure it will be clean enough in 2 hours?

Who knows and prob won't be clean,

 

[bilabonic]

Jumped the gun a bit there. Sorry. My bad. Forgot that Baxi have the drop down pcb and seperate combustion cover

Yep, just two screws and it drops down, then one screw to remove plastic cover that has LNE and stat connection.

 

[Harvest Fields]

I just checked also and yep. You are correct about filter. Sorry. However it does state that it has to be flushed properly and I doubt your system would have been clean in 2 hours.

 

[Riley]

Guarantee system dirty

 

[sammathias]

No filter mean no warranty. They need to fit a filter.

You mean inline scale filter or magnetic filter? Having no magnetic filter doesn't void warranty even tho its good practice to fit one...system needs to be crystal clean mind. Don't have to fit scale filters down this way so not sure.

 

[sammathias]

Should really read the rest of the post first haha. Sorry harvest.

 

[Harvest Fields]

You mean inline scale filter or magnetic filter? Having no magnetic filter doesn't void warranty even tho its good practice to fit one...system needs to be crystal clean mind. Don't have to fit scale filters down this way so not sure.

I have seen companies honour warranties with dirty water because a magnetic filter has been fitted.
Inline is a must up here.