Advice for adding a branch into my existing stack

[ShaunCorbs]

Would leave as it if you want to smarten it up get some black paint and some new clips

 

[snowhead]

Paint it.
Don't use undercoat, just gloss, clean the green algae off first.

The 2 horizontal runs (from the bathroom?) could do with brackets and the rodding Tees are on the wrong way around.

Stack pie as per Craig, maybe with a rodding access just above the ground.

 

[J murton]

Great advice all round. Thank you

 

[J murton]

Can anyone clarify if push fit 110 is compatible with solvent weld 110 ?
Thanks

 

[ShaunCorbs]

Yes same pipe used for both

 

[Rob Foster]

Sometimes they are all compatable but this has always been my gripe about uk plumbing and heating fittings
not all are. It is totally stupid
but commercially sense to lock
end users into,this game.
basically dont buy any stuff from the big sheds visit your
local plumbers merchant buy their gear and it will all fit
Rob Foster aka centralheatking

 

[Harvest Fields]

Yes same pipe used for both

I have found it depends on manufacturer.

 

[J murton]

Went well thanks for all advice.