Search the forum,

4” osma fittings advice please?

Post new thread

Discuss 4” osma fittings advice please? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

M

macka09

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,226
I’m doing some 4” soil and I’m having a debate about what can be done with these fittings. They’re both 45s. The double socket has a ring seal on it facing up and the spigot of the other 45 goes into it the bottom. The 2nd 45 is then glued on the spigot and socket. Is this acceptable?
 

Attachments

  • A724DC4E-AD8F-41BB-8E23-C37DDF551B3C.png
    A724DC4E-AD8F-41BB-8E23-C37DDF551B3C.png
    314.5 KB · Views: 8
  • 9F7EDC9A-4196-4A88-8B62-BB67CBF8BB17.png
    9F7EDC9A-4196-4A88-8B62-BB67CBF8BB17.png
    254 KB · Views: 8
  • 6EE79D2D-EC5E-4CD1-854A-A65740548209.jpeg
    6EE79D2D-EC5E-4CD1-854A-A65740548209.jpeg
    114.6 KB · Views: 11
Yes fine just be certain when glueing I’m guessing your making a set /
 

Reply to 4” osma fittings advice please? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
261
oz-plumber
O
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
217
SimonG
SimonG
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
365
Chuck
C
D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
264
DIwhYdidIstartThis
D
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
157
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Contractor Advice Forum
Tiling Forum
Tile Blog
Tile Advice
Electrical Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock