D
davss
Hi All,
I have a 37CDi model, Danfoss TP5000SI-RF thermostat + RX1 receiver , Grundfos pump (230V), 4-wire actuator (230V) and Electronic Underfloor Heating Water Temperature Stat (230V) attached to manifold. Anyone know how to wire up all these?
The system is described:
I got the 40m2 single zone pack from
Single zone underfloor heating kits for use with an extension or conservatory. Packs and prices for 20sqm to 60sqm kits.
underfloor heating connected to a combi boiler
Boiler manual:
Redirect Notice
RX1 wiring:
http://www.uk-plumbing.com/brochure/danfoss/RX1RX2wiring.pdf
http://www.uk-plumbing.com/brochure/danfoss/RXuser.pdf
Many thanks in advance, David
I have a 37CDi model, Danfoss TP5000SI-RF thermostat + RX1 receiver , Grundfos pump (230V), 4-wire actuator (230V) and Electronic Underfloor Heating Water Temperature Stat (230V) attached to manifold. Anyone know how to wire up all these?
The system is described:
I got the 40m2 single zone pack from
Single zone underfloor heating kits for use with an extension or conservatory. Packs and prices for 20sqm to 60sqm kits.
underfloor heating connected to a combi boiler
Boiler manual:
Redirect Notice
RX1 wiring:
http://www.uk-plumbing.com/brochure/danfoss/RX1RX2wiring.pdf
http://www.uk-plumbing.com/brochure/danfoss/RXuser.pdf
Many thanks in advance, David