You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
supplies
Pet Supplies Plus (also styled Pet Supplies "Plus"), founded in 1988 in Redford, Michigan in the United States, is a privately held pet supply retailing corporation with a major presence in the US. As of 2005, it was the third largest specialty pet food retailer in the US. The company began adding franchise locations in the Midwest, expanding into the northeastern and southern states during the late 1990s. As of February 2021, Pet Supplies Plus store locations consisted of over 560 stores in 36 states.
Hi there. New diy member here. I am refreshing my bathroom and the taps are currently fed cold mains and gravity hot from the loft. There only seems to be a very small cold water tank in the loft.
I am looking at putting a bath filler mixer tap on the bath but concerned about the unbalanced...
We have 2 separately metered water supplies entering our property and these feed 2 sets of outside (garden) taps. Can we join together the supplies coming from the meters, put the water through a (domestic) booster pump, then split the output to feed the outside tap systems?
I won't go into the specifics here because it'd be far too long, but in a system I'm building I have two hot supplies - one between 25C and 35C, and one between 45C and 70C. (In short, I have two heat sources that perform differently under different conditions).
I want an output temperature of...
Just starting on a project that involves installing a new gas supply U40 2 inch job but the client already has a very old u16 supply which is piped from a remote meter box and underground steel pipe. The pipework cannot deal with the increase in demand required (quite frankly its not really up...
I have been a plumber for nearly 15 years and made good living from it, and saved quite a lot of money since I been living with my family.
I am really thinking of using a office space and buying boilers and heaters and stocking and selling them, what I have noticed is plumbing and heating...
i have a friend who is setting up a new venture he has worked in this field for quite a few years and decided to set up a company, will give details when site goes live
mark
Hi Guys
would somebody be kind enough to advise what the best way is to increase the hot water pressure from the shower please? we have a conventional boiler setup.
Many Thanks
Unregistered
Thread
answers
hot
hot water
hot water pressure
pressure
receive
shower
supplies
water
water pressure
Got a 'doc m' pack to fit soon in a working mens club, the hot is being supplied via a wall hung water heater, the type being fed by a little cistern above, the height of the water level is approx 2m above floor level and the tmv for the new wash basin will be approx 1.5m below water level. and...
Sharp Point
Thread
approx
basin
below
head
level
pressure
suitable
supplies
tmv
water
Hi, we want to install a thermal store to link a Rayburn 355, conventional oil boiler (as backup) and solar. Our main hurdle is all the thermal stores we have found require mains cold water supply for dhw. Whilst there is reasonable pressure from the pumped water supply, it is unlikely to be...
Hi guys, I hope you can help. I have to do a bathroom install as part of my plumbing course. I have to use copper connections for the supply pipes for the bath. The pipe coming from the ground into the iso valves has to be clipped back to the wall so I'm guessing there will be a slight offset...
what is the best shower for unbalanced supplies and these are very unbalanced and it is a negative head I know digital has better temp control because it measures faster but do they balance better
Bungalow. Cold water tank in loft on flooring. Hot water tank below.
I'm thinking it would be better to run hot and cold supplies under screed to bathroom rather than run across loft and drop into bathroom.
Didn't want to dig floor up, so are there any problems running pipes across loft?
Oxfordshire Tiling Supplies (Stockists of 365-Drills)
01235 364 920 - Ask for Hazel
As of August 2013 OTS carry the FULL range of diamond cores and tile drilling bits to drill holes into the hardest porcelain tiles.
You can find OTS or Oxfordshire Tiling Supplies at
Tiling...
Hi guys just finishe a job running new pipe from the mains to the kitchen and bathroom hot and cold supplies. Customer has just phoned me and said that the pressure is low. The old pipe was wider than 15mm and i think it was lead. Now it's all 15mm. Is that the problem?
Hoping to get some...
Hi need help please,my wash hand basin has a hot water feed from the storage tank and a cold water mains feed to the two separate taps ,I would like to put a mixer tap in so do I need both feeds from the header tank and would it be ok to take a 15mm branch of the 22mm pipe that feeds my bath...
Hi all,
Some advice/help please.
Fitted a thermostatic shower suitable for low pressure on what I thought was a balanced gravity fed system, teed into bath supply.
Turns out the cold supply is actually mains and so the shower is working properly when turned over to hot it just trickles out...
ok just a question out of intrest really was reading one of the product catlogues today while sat waiting in the van i think it was BES and flicking through noticed that they sell all the gas mdpe products fittings etc and my question is who can move the meters ? i was under the knowledge that...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.