Search the forum,

short

In finance, being short in an asset means investing in such a way that the investor will profit if the value of the asset falls. This is the opposite of a more conventional "long" position, where the investor will profit if the value of the asset rises.
There are a number of ways of achieving a short position. The most fundamental method is "physical" selling short or short-selling, which involves borrowing assets (often securities such as shares or bonds) and selling them. The investor will later purchase the same number of the same type of securities in order to return them to the lender. If the price has fallen in the meantime, the investor will have made a profit equal to the difference. Conversely, if the price has risen then the investor will bear a loss. The short seller must usually pay a fee to borrow the securities (charged at a particular rate over time, similar to an interest payment), and reimburse the lender for any cash returns such as dividends they were due during the period of lease.
Short positions can also be achieved through futures, forwards or options, where the investor can assume an obligation or a right to sell an asset at a future date at a price that is fixed at the time the contract is created. If the price of the asset falls below the agreed price, then the asset can be bought at the lower price before immediately being sold at the higher price specified in the forward or option contract. A short position can also be achieved through certain types of swap, such as contracts for differences. These are agreements between two parties to pay each other the difference if the price of an asset rises or falls, under which the party that will benefit if the price falls will have a short position.
Because a short seller can incur a liability to the lender if the price rises, and because it normally does the short sale through a broker, a short seller is typically required to post margin to its broker as collateral to ensure that any such liabilities can be met, and to post additional margin if losses begin to accrue. For analogous reasons, short positions in derivatives also usually involve the posting of margin with the counterparty. Any failure to post margin promptly would prompt the broker or counterparty to close the position.
Short selling is an especially systematic and common practice in public securities, futures or currency markets that are fungible and reasonably liquid.
A short sale may have a variety of objectives. Speculators may sell short hoping to realize a profit on an instrument that appears overvalued, just as long investors or speculators hope to profit from a rise in the price of an instrument that appears undervalued. Alternatively, traders or fund managers may use offsetting short positions to hedge certain risks that exist in a long position or a portfolio.
Research indicates that banning short selling is ineffective and has negative effects on markets. Nevertheless, short selling is subject to criticism and periodically faces hostility from society and policymakers.

View More On Wikipedia.org
  1. S

    Tap Spindle too Short

    I have recently brought new mondella pin lever 1/4 turn ceramic taps - Mondella Black Resonance Pin Lever Wall Top Assembly - https://www.bunnings.com.au/mondella-black-resonance-pin-lever-wall-top-assembly_p5004187 However once installed we don't have enough spindle left to properly attach the...
  2. P

    Saniflo short ciircuiting house breaker

    Hi, Our 5 year old Saniflo (Saniplus) triggered the house electrical circuit breaker. I reset the circuit breaker the unit hums for one second then trips the breaker again. I checked around the box there are no lose connections or a leak. I also checked the fuse near the wall outlet. Any idea...
  3. N

    Short Cycling Boiler

    Hi, First time poster. I've been banging my head against a wall this past month on google searches and soliciting advice of a couple of plumbers as well as the boiler supplier. I got a De Dietrich 28-33kw Combi boiler installed just over a year ago, with UFH downstairs (3 zones) and radiators...
  4. C

    Hot shower going cold for short periods.

    Morning, hope there is someone to help with this issue. I have a client who is experiencing issues with her shower valve. MAnual only not thermostatic. It is admittedly one at the cheaper end of the market. But only manual as I say. Whilst showering she experiences periods of cold/cool water...
  5. S

    Copper pipe slightly too short

    I have replaced some parts in my toilet cistern including the rubber seal between the cistern and the toilet. Unfortunately the replacement is thicker than the previous one and as a result the copper water pipe doesn’t match with the cistern inlet by a few mm. Any thoughts on how to resolve this...
  6. R

    Pipes too short for shower bar

    I am redoing my bathroom and fitted new tiles that are thicker than the previous ones. Now I have come to refit the shower bar the existing water pipes do not protrude far enough out from the wall to be able to fit the brackets and shower bar. The fitting require minimum 30mm, I have 20mm can...
  7. J

    Need to extend the 3/8" braided stainless steel faucet supply lines for my bathroom sink.

    The 3/8" braided stainless steel faucet supply lines for my GROHE bathroom sink are a couple of inches short. Is there a way to extend their length? The way this faucet is built there is no way to replace the supply lines with longer ones.
  8. V

    Viessmann boiler short cycling

    Hi, I have noticed my boiler Viessmann Vitodens 100-W(B1HC-26) makes a series of short cycling before starting to heat. Boiler is controlled by Baxi uSense room thermostat connected via Opentherm. I installed some monitoring equipment to get the better understanding of the problem. Bellow is...
  9. rwb196884

    Fitting a radiator that's too short

    TL;DR: Office workers should not be allowed spanners. Just bought a house and found the living room wasn't getting much above 15 degrees. It had a type 11 1400x600 radiator that seem to be about 3,500BTU but online room BTU calculators come out at about 8,000 to 11,000. Bought what I thought...
  10. J

    Atag boiler only cycling on for a short time

    Hi, I had an Atag system (heat only) boiler fitted about 3 years ago. It’s model IR24 LPG. It’s worked fine for the first year or so, but on the second winter (last winter) it had a strange problem where it would only cycle on for about 1 minute and then would go off for about 5 minutes, before...
  11. A

    Old Style dual flush - short flush - press and release WANTED

    The old Dudley type - long flush press and hold, short flush press and release. I can't get one anywhere they all seem to be the opposite way around - stand there holding the lever and looking into space for the short flush ! (which we all do more often) and press and run off for full flush...
  12. S

    Boiler short cycling/ Flow issue

    Dear forum readers, I have had quite a lot of work done to my CH system including TRV replacement, new radiator installation, new pump installed and several repairs as a result of the work including repair of leaks under the concrete floors! However, I am still faced with some serious...
  13. B

    Short cycling Bosch Worcester 30CDi Greenstar - Bypass Valve?

    My first post, so apologies for any incorrect terminology I had a Bosch Worcester 30CDi Greenstar Classic Regular Boiler installed in 2014. The Boiler is used in a vented S-plan system, with two motorised valves, a manual Bypass Valve, a British Gas (Grundfos) Multi-head pump, Hot Water...
  14. Michael Groves

    Worcester Bosch Greenstar Ri boiler short circuit

    I’m an electrician. I’ve been called to customer home to trace a short circuit. When I disconnect the boiler and put my meter across live and neutral I get 118 ohms. I called Worchesterbosch tech support and the guy said yes that’s normal, no hold on I’ll ask my mate. Then apparently said no...
  15. T

    Gerebit Flush Valve too short, any ideas how how to make the button sit higher?

    I've bought a replacement flush valve for (Geberit 282.350.KD.1 Flush Valve) as the last one fell to pieces, it works perfectly but the top down button is about 2 inches too short to sit in the hole on the cistern lid. Is there an easy way to get it to sit higher? You can reach it if you have...
  16. A

    Where to get short, 8mm thread copper tails?

    This dam basin I’m fitting is for a particularly fussy customer. Its a corner, wall hung basin. He does not want to see the pipework, and I’m not putting the flexi tails that came with it connected in the wall like I’ve seen others do. All I need are a pair of copper tails (readily available) -...
  17. A

    Siamp flush valve only gives short flush.

    Was asked to have a look at a few things for a customer this evening. Sink waste needs altering so the washing machine doesnt back up and, a new shower and an issue with the toilets. x4 close coupled toilets in the property. All with Siamp flush valves. 2 of them work as they should, long...
  18. M

    Boiler short cycling modulation problem.

    My boiler keeps short cycling when the UFH (ground floor 5 zones) is demanding heat. Burner is on for 1 min and off for 3 mins constantly. I have CH (5 Rads) upstairs HW as well. Boiler is Potterton Tittanim 40kw. Boiler modulates perfectly when CH and HW are demading and burner remains...
  19. W

    Anyone made multiple claims on insurance in short period?

    Up until the last month or two I had managed to only make one claim since I started 8 ish yrs ago. But in the last 6 weeks ish I find myself needing to make 2. Anyone else had to do this? Making me feel like I'm a walking disaster. Neither are huge, should both fall under the £2k mark with any luck.
  20. E

    boiler is Short cycling

    should a boiler short cycle. I have a ideal logic heat 12 and once it gets to it get to the required temp it turns off correctly. Shortly after the blue burner light comes on for a min then turns off and then it powers down for 4 mins and then boiler turns off. Five minutes later starts the...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock