Search the forum,

Are any solvent fittings available?

Post new thread

Discuss Are any solvent fittings available? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
SMB

SMB

Messages
52
Hi,
I am at present doing a project (not plumbing).
I need to connect 15mm copper fitting to either 50 or 40mm plastic pipe.
Does anyone know of a solvent adapter available, as I can't find one.
Many thanks.
SMB
 
May I ask why ?
 
image.jpeg
image.jpeg
ShaunCorbs said:
May I ask why ?
Click to expand...

Basically one of these to get the tall weeds in an orchard.
However can't get a waterproof AND secure fitting of the 15mm straight connector into the plastic pipe.
 
Status
Not open for further replies.

Reply to Are any solvent fittings available? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
259
ShaunCorbs
ShaunCorbs
T
Trying to source a dual-flush valve
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
191
Thomas J Marshall
T
B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
182
ShaunCorbs
ShaunCorbs
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
238
exedon2
exedon2
P
LCS to new water mains
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
189
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock