Search the forum,

Discuss Balancing heating question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

Adam80

I am thinking of balancing my heating system. On my landing there is a room stat with a radiator opposite. Does this radiator need balancing too or should the valves be fully open?
 
Stat opposite a rad. Thats great for your gas bill but carp at trying to warm the house , unless its turned right up .
 
i presume its not got any trv on it?

i would turn that one off first and open the one furthest from boiler up fully open then work your way back to the boiler. opening each l/s one turn on, then finally the hall rad 1/2 turn on.
should heat whole place before stat is satisfied.
 
Hi Adam, sorry to be a Doris but unless you are confident in replacing a leaking radiator valve I would not recomend touch them. See about one in five lockshield valves leak soon as you turn it.
 
There is a thread in the sticky section of this sub forum called "Croppies balancing thread"
You may think it concerns a perverted old man performing circus tricks, but you'd be wrong
It's quite iformative
 
Status
Not open for further replies.

Reply to Balancing heating question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have had a problem where 2 downstair radiators are not heating up the same as the rest of the radiators around the house, now previously i had an electric boiler which heated all the radiators just fine, but around a few years ago i had a gas one fitted and the radiators in the living and...
Replies
2
Views
228
O
Hi All, We renovated our house in 2019 and put in completely new plumbing system and piping including new boiler and 9 radiators. Off those, there is one radiator in the living room which does not heat up at all. I have tried balancing myself and also had a professional come in to balance it...
Replies
1
Views
684
I am after an advice, please. We have a vertical radiator from Reina, Evie, that heats up only 2nd column fully, 1,3 and 4 are lukewarm. I borrowed a thermal camera and attached is the thermal image. System is balanced, there doesn't seem to be air coming out of the bleeding valve and was...
Replies
8
Views
642
I have TemCon balancing valves fitted on my sits and a questions been asked whether these require servicing. Can't find much info on the manufacturer website so can anyone confirm if they do and if so what level of service is required?
Replies
3
Views
359
Hi all, Looking for some advice please. Got a building, all one level with 7 radiators. 3 individual ones in separate rooms then 4 radiators all together in one large room. The issue is with the 4 radiators in the large room. Basically not getting hot, the first 10% of the radiator is...
Replies
2
Views
297
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock