electric shower problems

[dancinplumba]

They will look at your install. It's either pass or fail.

same as gas then

 

[SimonG]

Sod the electric and fit a nice thermostatic mixer off of the combi hot and cold.

 

[Guest123]

Sod the electric and fit a nice thermostatic mixer off of the combi hot and cold.

Most sensible suggestion all bloody night.LOL

 

[gasmanrob]

ive just wasted 15 minutes of my life reading this

 

[Guest123]

How do you get registered to be a TSR is it a long or expensive course

As long as you work out a discount with Warburtons, it can be quite cost effective.

 

[SimonG]

Most sensible suggestion all bloody night.LOL

Well that's my one for the year, thought i wasn't going to get it in this year

 

[lame plumber]

Do you have to be qualified to put in a mixer shower ?? :29:

 

[TBServices]

All I am saying to you is check you are insured to undertake electrical work however small you think it may be. By the way I have got a life.

Tbf bud a large part of that life seems to be winding people up.

Who in their right mind would pass up a job as simple as wiring a shower? If you get there and the cable/isolation/fuse looks dodgy then you walk away. Simple.

 

[Guest123]

Do you have to be qualified to put in a mixer shower ?? :29:

As long as you know how to wire it up, reckon you'll be just fine ;-))

 

[dancinplumba]

Do you have to be qualified to put in a mixer shower ?? :29:

no, just prove competence

 

[AlexGas]

There’s, defo, no need for a guessing game or cutting corners in gas or electrical works – you ether know how to do a job or not. Also, you have to be switched on – so you understand what you need to do on a job, otherwise you might end up on the news and will be getting a free food - in prison that is. The choice is yours.

 

[Guest123]

On the subject of regs, wireless electricity is just about a decade a way. No plugs, no cables, just one big control box, digitally controlled by a computer. Wonder what that will do for a sparks career?

 

[Howsie]

On the subject of regs, wireless electricity is just about a decade a way. No plugs, no cables, just one big control box, digitally controlled by a computer. Wonder what that will do for a sparks career?

Fast path plumber

 

[tamz]

Yes that is what I said, it should be sized to suit the load and run, and increased if the run is a long one. But 10mm is now the minimum and any M.I I've read recently states this.

From a Triton MI
9.2 In the majority of installations, the cable
will unavoidably be placed in one or more
of the above conditions. This being so, it
is strongly recommended to use a
minimum of 10mm cabling throughout
the shower installation.
9.3 In any event, it is essential that individual
site conditions are assessed by a competent
electrician in order to determine the correct
cable size and permissible circuit length.

What that basically says is stick a 10mm in and it should be fine but not always. It could require a bigger cable (16mm) or you may be able to safely use a 6mm if it is a short surface run.
That is why it is best left to those who know how to work it out to do the work and take the responsibility.
Same as gas.

 

[tamz]

On the subject of regs, wireless electricity is just about a decade a way. No plugs, no cables, just one big control box, digitally controlled by a computer. Wonder what that will do for a sparks career?

I would worry more about what it would do to those living with it.

 

[lame plumber]

no, just prove competence

Heeeeeeee's back!

 

[Howsie]

I would worry more about what it would do to those living with it.

You'll be able to see them in the dark!

 

[dancinplumba]

I would worry more about what it would do to those living with it.

would be like being in a microwave oven

 

[Guest123]

I agree with what you're saying about leccy for electricians and gas for gsr's. That's why I carry 2 sparks on every job to fit everything from downlights to showers, as they know what they are doing and more importantly are qualified to do so. 10mm is the recommended cable size and when I did my stint with our local council, any tenant vacating a property that had installed a shower with under 10mm cable had to have it removed.

One I removed in Edinburgh this year was wired up to a light switch under the bath with 4mm flex and the heat had fused the copper core to the switch itself.

 

[dancinplumba]

Heeeeeeee's back!

avent been anywhere yet

 

[Guest123]

Kiddies, can Mr Mod play too?

 

[lame plumber]

I thought we already had wireless leccy, I call it lightning

 

[Guest123]

I would worry more about what it would do to those living with it.

It will be shielded. Wireless leccy tellys are just round the corner.

 

[lame plumber]

Kiddies, can Mr Mod play too?

ON NO YOU CAN'T or BEHIND YOU after all its panto time

 

[tamz]

It will be shielded. Wireless leccy tellys are just round the corner.

No in my house the're not :lol:

 

[AlexGas]

From a Triton MI
9.2 In the majority of installations, the cable
will unavoidably be placed in one or more
of the above conditions. This being so, it
is strongly recommended to use a
minimum of 10mm cabling throughout
the shower installation.
9.3 In any event, it is essential that individual
site conditions are assessed by a competent
electrician in order to determine the correct
cable size and permissible circuit length.

What that basically says is stick a 10mm in and it should be fine but not always. It could require a bigger cable (16mm) or you may be able to safely use a 6mm if it is a short surface run.
That is why it is best left to those who know how to work it out to do the work and take the responsibility.
Same as gas.

It's better to put 10mm cable in. A 7.5kW shower will be fine on 8mm cable. But, say a year later you are comming back to the same house - a 10kW shower needs to go in... DOH! 10mm cable has to run that. Why not to put 10mm in the first place!?

 

[Guest123]

For anyone wanting something totally useless to read, here's a link about wireless leccy:
WiTricity Corp. Home ? Wireless Electricity Delivered Over Distance

 

[nicro3]

Tbf bud a large part of that life seems to be winding people up.

Who in their right mind would pass up a job as simple as wiring a shower? If you get there and the cable/isolation/fuse looks dodgy then you walk away. Simple.

TBF Chum no its not

 

[lame plumber]

It's better to put 10mm cable in. A 7.5kW shower will be fine on 8mm cable. But, say a year later you are comming back to the same house - a 10kW shower needs to go in... DOH! 10mm cable has to run that. Why not to put 10mm in the first place!?

cmon alex we left the thread a long way back, it wireless leccy and panto land now!

 

[Guest123]

Seven pages and 100 posts all about hee haw, that's Saturday night for you. :yesnod:

 

[AlexGas]

Sorry, my keyboard is a bit slow - it's wireless!

 

[dancinplumba]

cmon alex we left the thread a long way back, it wireless leccy and panto land now!

oh no it isnt

 

[Guest123]

Well leccy cars are here to stay, so next step would be for them to auto charge themselves off the mains.

Might be fun watching the wife plug in her Punto, it's petrol.

 

[nicro3]

Wheres you plumbing career ---------------------its behind you

 

[lame plumber]

Wheres you plumbing career ---------------------its behind you

Your retired so it may well be old son, but as far as mine goes OH NO IT ISN'T:smilielol5: