Search the forum,

Discuss Tap tools in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

helpsy

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,754
:confused:In your opinion what is better bearhug tool or jaw dropper?
I have telescopic wrench already.
 
imagine bending the end of the spanner just where the flats are 90 degrees and there you have it

i will call it a tap spanner....


never owned either of those, dont think i ever will at those prices as i have never come across a tap that wont come of with conventional tools ie. deep socket & tap wrench?.
 
Crows foot, hard work.

Monument Adjustable Basin Wrench, much better.
 
i got the jaw dropper, nice piece of kit for £50. just the job for tiny basins!
 
My jaw dropper's not used that much these days but it's a real get out of jail free tool when I need it.
 
Bought the jawdropper after using all types of wrench, will not use anything else, very expensive but worth every penny.
 
what is the jaw dropper ? I use a crow foot and I also have a box key which works sometimes.
 
ive been using the bearhuggers but ive been finding you dont have enough room on bath taps to lever the handle, gonna invest in the jaw droppers
 
duckfoot(or crow) for undoing the swivel nuts barrel for tightening the back nuts i have never used the bear hugger or jaw breaker
 
About time, see they have a place to clip on the jaw you are no using at the time to stop it getting lost, must of spent a fortune in lost jaws over the years !!:



Although it's a screw and I've found it works loose and ends up lost in the toolbox.I've put some PTFE on the thread to try to stop it coming loose.Might work!
 
Although it's a screw and I've found it works loose and ends up lost in the toolbox.I've put some PTFE on the thread to try to stop it coming loose.Might work!

Yeah it always works loose, but you find it at the bottom of the tool box. Had mine for about 8/9 years. Before that used a Crowsfoot. Don't even own one these days. Not that they're expensive, about £2!
 
i got the jaw dropper, nice piece of kit for £50. just the job for tiny basins!
 
I use the jawdropper as well. Bought it when I broke my crows foot on a particuratily tight tap. Then broke the jaw dropper, oops. Merchant replaced it as faulty, ended up cutting off that tap.
Jawdropper nice to use though.
 
Status
Not open for further replies.

Reply to Tap tools in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
140
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
344
  • Article
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was prosecuted after Hereford Trading Standards Team found that he was falsely claiming to be on the Gas Safe Register when he was not, putting members of the...
Replies
0
Views
169
B
    • Friendly
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper end of DIY and I've a couple of house renovations under my belt (my own homes) I am retired but do volunteer handyman jobs for the elderly. Not...
Replies
2
Views
131
S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
2
Views
91
S
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock