Search the forum,

worcester bosch supply chain

Post new thread

Discuss worcester bosch supply chain in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
G

gstar04

Messages
5
Anyone know of a co.who can supply and deliver me with Worcester boilers at a good price and high volume (50 a month) indirectly? Don't want to deal with Worcester directly or any plumb centres? All suggestions welcome
 
Williams are great but i get my boilers including flues for the same price as boiler only from them. I'll pm you but if your local to me - i wont

But begs the question - why not negotiate with plumbs or whoever else or direct (if they will deal with that amount) - business is business.
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to worcester bosch supply chain in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
137
Lou
Lou
P
Viessmann combi starts when cold, mixer, tap is opened
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
204
ShaunCorbs
ShaunCorbs
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
231
oz-plumber
O
R
Multi Meter which one for engineers
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one ....just easy to use and reliable. The fluke 115 looks good but its above my budget. My current socket and see one was great but it's developed a fault.
Replies
7
Views
236
oz-plumber
O
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
301
oz-plumber
O
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Tools for Beginners
DIY Forum
Tilers Talk
Plumbing Advice
Tiling Forums UK
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock