Discuss Worcester bosch junior 24 i in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

jitenbulsara

Gas Engineer
Messages
43
I am needing some help on a 24i regarding internal leaks.About three months ago I re pressurised a 24 i and checked all the rads left the system running.three months later it's dropped below running pressure so tracing 1 bar over three months is lots of investigating.I will put in a leak sealer and see but just wanted advice if anyone has injured an issue with a 24i and internal leakage?.....
Thanks
 
You need to be a GSR Engineer to work on the boiler.
As far as leak sealer goes, my advice is to find the leak and fix it, don't put that in.

If its a water leak inside the boiler, Then you still need a GSR Engineer
 
1 bar over three months will be hard to find, especially if leaks only when system cold, but sheet of paper below boiler might confirm an internal problem.
 
1 bar over three months will be hard to find, especially if leaks only when system cold, but sheet of paper below boiler might confirm an internal problem.

Sounds like it but to open it up you need to be Gas safe
 
Jiten, we've already got your details, I'll fire off a note to the admins.

I'm going to close this thread for the time being but as soon as your yellow badge is showing I'll move and reopen it, as well as the others you asked for help on.
 
Status
Not open for further replies.

Reply to Worcester bosch junior 24 i in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Greetings. I have an external Worcester Bosch Heatslave boiler and have a question about pressure. The boiler pressure was set to 1.5 during a...
Replies
4
Views
579
Greetings. I have an external Worcester Bosch Heatslave boiler and have a question about pressure. The boiler pressure was set to 1.5 during a...
Replies
4
Views
483
W
  • Question
My Worcester Combi Boiler is not working, instead the display flashes on and off repeatedly, as shown in <a href=" View...
Replies
1
Views
453
Hi all, anyone give any advice regarding our Bosch Worcester Junior 28I .... I have to keep re pressuring it every two weeks ( drops to 0.6- I put...
Replies
9
Views
2K
K
My Worcester boiler is losing pressure. It only happens after the boiler has been on and it loses approx 0.5 bar each time. The expansion vessel...
Replies
2
Views
925
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock