Discuss Worcester Boiler is crashing/lockout randomly when using central heating. in the Central Heating Forum area at PlumbersForums.net

Messages
2
Hello, I've previously had an issue with my boiler pressure getting too high with the central heating on and needing a reset. I had a gas plumber come round and he swapped the expansion vessel. The pressure issue seems to be fixed but now there is another issue...

When I turn the central heating on, the radiators will start to warm up but the boiler will crash/need reset. This happens at random times after I turn the CH on, it could crash after 10 minutes or 30 mins ... or over an hour. The pressure always seems okay - 1.5 to 2.

If I only use the hot water then I have no problems. It's a Worcester combi boiler

The gas man had a look over the connections again and said the next step is replacing the nodes?... and then PCB and Gas valve. This could end up costing a lot. Any advice on how I should proceed?
The error code is a consistent blink, an even on/off rhythm.. I was told this is an ignition error...
Many thanks
 
Agreed about the engineer. No fault code?

If it looks like looking costly contact WB for a fixed price repair.

Edit: they don't seem to offer it anymore Shaun?

 
Agreed about the engineer. No fault code?

If it looks like looking costly contact WB for a fixed price repair.

Edit: they don't seem to offer it anymore Shaun?


Yep they still do it think it’s gone up tho £325 but they will replace parts until it’s fixed
 
Thanks guys. The fixed price option looks interesting. Now I've looked into it.... I see British gas offer a fix and 12 month cover for £300.. which seems like a better deal unless I'm missing something?

 
That does seem like a better deal with cover but my instincts would still be to go with WB fixed price. Depends where this is going as Shaun says if a big ticket item like the hex or PCB needed replacing WB would throw parts at it till it's fixed but I suspect BG would drag their feet to minimize their outlay. If it's a simpler less costly fix then the BG deal makes more sense.
 
That does seem like a better deal with cover but my instincts would still be to go with WB fixed price. Depends where this is going as Shaun says if a big ticket item like the hex or PCB needed replacing WB would throw parts at it till it's fixed but I suspect BG would drag their feet to minimize their outlay. If it's a simpler less costly fix then the BG deal makes more sense.

And bg would have to order parts normally the Worcester lads have everything on the van
 

Reply to Worcester Boiler is crashing/lockout randomly when using central heating. in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no...
Replies
6
Views
266
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
283
PSxxxxxx
P
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
221
Hi, Later this year I am going away for a 2 week holiday and as the weather will be warm there is no need for the heating to be on and arguably...
Replies
1
Views
169
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
396

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock