Search the forum,

Discuss Wireless controls to upgrade gravity system in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,172
Morning all. I am looking to either convert a Potterton performer to a fully pumped system or replace the boiler. Either way I am going to need wireless controls to get to the cylinder thermostat. Can anyone recommend any controls they use or is it just go with honeywell.

And what system boilers are you installing as I want to give a price for this also.

Thanks Lee
 
Thanks chaps. Not used any Drayton controls before. Think I will quote both the above though.
 
Danfoss make a version of wireless cylinder thermostat.
 
Did a worcester bosh greenstar classic recently and used the Honeywell rf pack wireless cylinder and roomstat kept zone valves at the boiler with a auto bypass worked out well .

20180409_093124.jpg


20180413_144849.jpg


20180409_092357.jpg


20180413_152919.jpg
 
Status
Not open for further replies.

Reply to Wireless controls to upgrade gravity system in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator pipes during the strip out. Not the end of the world as damages happens. I am responsible builder and paying my bills and to repair the damages if...
Replies
2
Views
81
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
247
PSxxxxxx
P
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
258
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
177
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
521
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock