Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss What wet vac to buy? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Piperdave22

Gas Engineer
Messages
61
I’m looking to get a decent wet vac . I have been using a Charles but it’s started spitting out when full and not shutting off
Had a titan and it corroded through the bottom .
Want it for sucking up brick dust when chasing pipes but also for final clean Etc so don’t want it blowing dust everywhere .
Aswell as general plumbing uses obviously .
Only have a small van so one that does all would be ideal but I’m thinking it may be best to just buy two , one for wet and one for dry .

What are you all using / recommend. Don’t mind paying good money for it . If it’s a decent bit of kit.
 

Reply to What wet vac to buy? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler...
Replies
1
Views
179
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
303
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
247
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
540
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
422
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock