Discuss What is the likely issue here, is replacing the tap the only solution? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

L

Leonid

We noticed some black gunk/residue on the cold water mixer hose - see photos.
I was wondering what the root cause could be and whether we should replace just the cold water mixer hose or the entire mixer tap.
Maybe there is another solution - would be great to know.
Thank you very much.
 

Reply to What is the likely issue here, is replacing the tap the only solution? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
Replies
3
Views
247
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
227
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Replies
6
Views
292
Back
Top