Search the forum,

Discuss Vokera sabre 29he got water fault in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Piperdave22

Gas Engineer
Messages
61
hello!
Has anyone worked on these Vokera sabre 29he combi boilers? I have one that when you run the hot tap it clicks loudly at pcb area and goes cold then hot .

Initial thoughts are a blocked heatplate but it looks like I have to take everything apart just to take it off and check it!
Has anyone taken one of these of and know how long it will take? And whether the boiler has to be dismantled?
Also suspecting divertor valve or water turbine can anyone point me in the right direction?

Central heating is working fine with no probs
 
Morning. Think some of us did mention about them being gas safe and waiting for the badge and post to be moved.;)
 
This is the gsr section
 
hello!
Has anyone worked on these Vokera sabre 29he combi boilers? I have one that when you run the hot tap it clicks loudly at pcb area and goes cold then hot .

Initial thoughts are a blocked heatplate but it looks like I have to take everything apart just to take it off and check it!
Has anyone taken one of these of and know how long it will take? And whether the boiler has to be dismantled?
Also suspecting divertor valve or water turbine can anyone point me in the right direction?

Central heating is working fine with no probs
Have not had this problem before mate. But will have a look at my bible when I get in. Leave it with me.
 
hello!
Has anyone worked on these Vokera sabre 29he combi boilers? I have one that when you run the hot tap it clicks loudly at pcb area and goes cold then hot .

Initial thoughts are a blocked heatplate but it looks like I have to take everything apart just to take it off and check it!
Has anyone taken one of these of and know how long it will take? And whether the boiler has to be dismantled?
Also suspecting divertor valve or water turbine can anyone point me in the right direction?

Central heating is working fine with no probs
At home now mate. How old is the boiler?
 
Is it definitely not doing it on heating as well? Just because the rads get hot I would not take that as a sign it is not doing it?
 
Plates are susceptible to blockages on a dirty system.
You can remove them without removing owt else although fiddly and also I'd be tempted to change the thermistor at the same time. Easy way to check is run hot water and at the time it shuts down, turn the cold supply lever off underneath and if the temp shoots up to the 90deg limit, then likely to be blocked plate.
 
Status
Not open for further replies.

Reply to Vokera sabre 29he got water fault in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
234
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
140
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
344
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock