Search the forum,

Discuss Viewing pictures in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
30
Only recently joined and finding UKPlumbers excellent! Question is why can I view/enlarge some of the pictures posted but some "you do not have permission" pops up?
 
Because you don't have enough posts under your belt yet.

Soon as you get to 10 or so!
 
Still can only see postage size pictures. If I click on them in any way it says you do not have permission for this action, refresh this page and log in again. If I do,same result.
 
You're still going into the moderation queue. Post a few more times, it'll sort itself out.

I'll keep a weather eye open for your posts, approve them soon as I see them.
 
I didn't have to mod that one, you want to check a few pictures for me?
 
I am also struggling to view pictures, I get you do not have permission etc
 
I have found a way around this problem. Click and hold image, choose open in new tab. You have to log in again which is a bit of a pain but then opens the image full size.
 
I've been looking back through the logs. It looks like this is one of the glitches left over from when we had a few problems with the forum architecture a couple of weeks ago. I'll let the owner know.
 
Status
Not open for further replies.

Reply to Viewing pictures in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
268
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
231
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
137
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I have just looked back through the regs this seems to have changed and it isn't mentioned now. It now mentions if at high level it should be discharged...
Replies
11
Views
267
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
234
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock