Search the forum,

Victoria plumb Odessa floor mounted 600 drawer and basin -

Post new thread

Discuss Victoria plumb Odessa floor mounted 600 drawer and basin - in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

mrmil

Has anyone fitted this unit with the low profile sink as advertised by VP?
I am struggling to find a waste that doesn't strike the back of the top drawer. I do not want to have to cut out a section of the back of the top drawer, which would be approx 90mm deep.


Feedback welcomed.

mrmil
 
Status
Not open for further replies.

Reply to Victoria plumb Odessa floor mounted 600 drawer and basin - in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
152
Lou
Lou
C
Is it necessary to earth bond a Kitchen Sink?
I am in process of replacing an existing sink with a new stainless steel one. The existing tap is plumbed directly to copper which means that it is earthed. The new tap will use flexible tails and so will not be earth bonded. My initial search for information suggests that there is no legal...
Replies
6
Views
264
pritchardsplumbing
P
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
205
dreikher
dreikher
D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
259
DIwhYdidIstartThis
D
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
284
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Tools for Beginners
TilersForums.co.uk
Tilezine Tiling News Tile Association
Plumbing Advice
DIY Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock