Discuss Vaillant f75 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Leo21

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
9,322
Anyone know the part number for the upgrade kit to relocate the pump sensor higher on the voiler?
 
And your not as useless as everyone says ;-)
 
There where three slightly modified ecotecs R1 R2 R3 etc but only one f75 kit, (personally I've never used one) then in early 2010 Vaillant moved the position of the pressure sensor to top left just after the pump lol
 
Leo21

would it work out cheaper to buy the rear connection tube and raise the sensor than to get the kit?
 
Status
Not open for further replies.

Reply to Vaillant f75 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Does anyone know a good, not super expensive, leak detection company in the London area?
Replies
0
Views
326
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer...
Replies
2
Views
183
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic...
Replies
2
Views
237
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could...
Replies
0
Views
274
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my...
Replies
3
Views
574
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock