Discuss vaillant f75 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

buckley plumb

fitted a vaillant eco tec pro about 3 years ago flushedthesystem when intalled got a call last night intermittent f75 after customer drained to fit new bathroom rad . going this wk to test the common faults for this / ex vessel /press sw /pump but sure on this age of boiler press sw was at top
 
was pressure switch - boiler was constantly reading 2.7 bar even when pressure released - no dirt in switch .boiler under warranty so vaillant called to change it. and this is the boiler with the revised press switch and repositioned in the new position I thought they cured this
 
what more can you do flushed on instal and spyrotech fitted .
 
Doesnt matter where the switch is there crap. had to swap loads on our installs old and new. also be prepared for the famous dripping diverter. they redesigned it and guess what.!!..thieve gone for a plastic version now that looks the same probably to save cash on service calls not cos there better.

Ps doesnt matter about flushing they choke even on brand spankin new installs..
 
Status
Not open for further replies.

Reply to vaillant f75 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
465
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
227
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock