Search the forum,

UVHWC parts - Any idea where I can get one of these?

Post new thread

Discuss UVHWC parts - Any idea where I can get one of these? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Robert Tyrrell

Robert Tyrrell

Gas Engineer
Messages
701
Any idea where I can get one of these? The 8 bar part not the rest. I used to have a supplier bookmarked but somehow I've managed to delete them and now I can't find a replacement.
IMG_0009.jpg
 
Is it me or does the over pressure discharge looks like it's going up hill

And +1 for aw
 
Looks like its been replaced before leading to that they may be other problems elsewhere
 
Status
Not open for further replies.

Reply to UVHWC parts - Any idea where I can get one of these? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

T
Trying to source a dual-flush valve
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
197
Thomas J Marshall
T
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
136
Lou
Lou
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
201
SimonG
SimonG
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
211
mutley racers
M
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
179
PSxxxxxx
P
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Electricians Talk
Tilezine Tiling News Tile Association
Electrical Advice
Plumbers' Talk
Tile News
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock