You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Discuss Unable to remove lever on Grohe basin mixer tap in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
Hi Pete,…the red/blue disc tap is not my tap,..it’s Timmy’s.Are you sure theres not a screw under the pop off hot cold red black disc.
But mine is similar and the screw you refer to …’grub’ screw has been removed!
Reply to Unable to remove lever on Grohe basin mixer tap in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
Similar plumbing topics
Hi All,
I have a Methven mixer that is leaking around the base so I bought a Fixit-It repair kit.
It does not have a red/blue cover for access to...
- Replies
- 6
- Views
- 2K
- Question
Hello
I have a Franke Planar Kitchen tap and it’s got a leak. One drop per minute.
I’ve been on YouTube and seen that there are grub screws to...
- Replies
- 1
- Views
- 185
I need to replace the washer of my kitchen mixer tap as it is leaking. I was able to remove the spout once by unscrewing the screw on the back of...
- Replies
- 9
- Views
- 465
Hi, I can’t get one cartridge to budge when trying to replace in a mixer tap. The hot side cartridge was tight but removed with wrench...
- Replies
- 7
- Views
- 852
How do i replace the quarter turn cartridge on this cooke & lewis ricci bath mixer tap .
Normally there is a grub screw somewhere to take the...
- Replies
- 1
- Views
- 521
Newest Plumbing Threads
-
UK Advice on waste water pump in first floor flat
- Started by kbqwert
- Replies: 1
-
AM18x1 femail to 1/2" hose connector.
- Started by Adaminspace
- Replies: 0
-
Off grid shower and toilet solution needed
- Started by TpXThinnr
- Replies: 2
-
Expansion vessel size unvented hot water
- Started by Matt0029
- Replies: 2
-
Acrylic bath manufacturing standards/dimensions
- Started by Michelle
- Replies: 2
-
-
Daryl Shower Head replacement (possibly over 30 years old)
- Started by morrig47
- Replies: 0