Search the forum,

Unable to find this specific toilet seat

Post new thread

Discuss Unable to find this specific toilet seat in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

gelegeta

gelegeta

Messages
4
Hi,

I have a Serel Toilet however the seat has broken and i am unable to find the exact replacement for it or replacement toilet seats with the same fittings.

Can anyone please advise on what the model number could be, as can't find it on the seat, have looked inside the toilet and there are some numbers but when i google them, nothing comes up.
 

Attachments

  • IMG-20220712-WA0005.jpg
    IMG-20220712-WA0005.jpg
    91.9 KB · Views: 9
  • IMG-20220712-WA0007.jpg
    IMG-20220712-WA0007.jpg
    78 KB · Views: 8

Reply to Unable to find this specific toilet seat in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
140
Stigster
Stigster
B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
189
ShaunCorbs
ShaunCorbs
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
190
dreikher
dreikher
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
140
Lou
Lou
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
344
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tilers Talk
Electrical News
DIY Forum
TilersForums.co.uk | UK Tiling Forum - Est 2006
Plumbers Forum - Plumbing Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock