Posting a message to the forum will remove the above advertisement
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Checkout our Plumbers Insurance area - heavily discounted Public Liability Insurance and Van Insurance specifically designed for plumbers.

Discuss UFH issues - Anyone recognise this symbol? in the Underfloor Heating Forum area at

  1. HelpMe

    HelpMe New Member

    Hi all,

    Just looking for some help. Moved into a house last year that already had UFH installed, but I have no information about the system and one of the air flow caps has spring a leak.

    Managed to cap it for now but trying to find a replacement part.

    The manifold has nothing written on it, but it does have an emblem.


    I'm sure I've seen it before myself but can't put my finger on it!

    Anyone any idea?


  2. HelpMe

    HelpMe New Member

  3. Uheat – Jake

    Uheat – Jake Sponsor

    @HelpMe@HelpMe That's a rifeng manifold, we used to supply the 5 years ago.

    What parts is it you need?
    • Like Like x 1
  4. HelpMe

    HelpMe New Member

    It's on the air flow meter things on too of the inlet side, if that makes sense. A couple of bits Ambiente so looked at them but didn't look right. Lol
  5. Uheat – Jake

    Uheat – Jake Sponsor

    Can you email me a picture of the parts you require and I'll have a look tomorrow to see what we have left on the shelf.
  6. HelpMe

    HelpMe New Member

    I'll take one when I get home and post on here!

    Many Thanks for your help, one step closer, at least now I know what it is!

  7. HelpMe

    HelpMe New Member


    One of these glass cap things. With the red base. Lol
  8. HelpMe

    HelpMe New Member

    You can see the blocked off one to the left where the original broke.
  9. Uheat – Jake

    Uheat – Jake Sponsor

    Ah the trusty flow meter, I currently have 41 on the shelf.

    Feel free to give me a call on 01394 593305 and we can sort one out for you.
    • Like Like x 1
  10. HelpMe

    HelpMe New Member

    Thanks Jake,

    What time are you there until? Wall to wall meetings today so finding a time when I can make a call.

    How much are they? I might take a few off your hands so that we have some spares etc.

  11. Uheat – Jake

    Uheat – Jake Sponsor

    Not a problem,

    I'm here till 5.

    £7.20 +VAT Each and £6 Carriage.
  12. HelpMe

    HelpMe New Member

    Ok, I'll take 3 of them then I think. One for repair and a couple spares.

    Assuming I can get out of a meeting long enough to give you a call.

    Or I can PayPal it ya etc if you use that there or anything? Or has to be by phone?

  13. Uheat – Jake

    Uheat – Jake Sponsor

    If you send me a PM with your name, address, phone number and email, I can send a PayPal invoice over to you. This will take you to the PayPal page which allows you to pay us directly.
Similar Threads - issues Anyone recognise Forum Date
Shower thermostatic mixer tap issues Commercial Plumbing Forum May 18, 2019
Kane Gas Flue Analyser Issues Gas Safe Registered Plumbers Only May 15, 2019