B
bartholomew10
Hallo, May I pick the brains on a problem I have please?. I have an old (as in at least 30 years!) Trianco Redfyre 37/45 which is working ok, but surely cannot last much longer!.
I have the offer of a burner from the same maker supposidly in good (recently) reconditioned condition and which looks dimensionally the same model (Inter?) except that it for a smaller heat output, (it's from a Trianco Redfyre 20/25)
The Danfoss oil pump on it is the same model, and the motor looks to be the same.
However, does anyone know is it possible to simply change the burner nozzel, electrodes, and maybe some other different internals to 'rebuild' my larger output model using the main body should mine pack up??. I am not sure about the transformer output of the 20/25 as it's a Satronic and not a May & Christie which is on mine.
Do transformers need to be 'matched' exactly to each size of burner?
Any advice at all would be much appreciated, as I don't want to pass up on this 2/25 if much of it could be used on mine in the future!.
Regards, and thanks, Richard
I have the offer of a burner from the same maker supposidly in good (recently) reconditioned condition and which looks dimensionally the same model (Inter?) except that it for a smaller heat output, (it's from a Trianco Redfyre 20/25)
The Danfoss oil pump on it is the same model, and the motor looks to be the same.
However, does anyone know is it possible to simply change the burner nozzel, electrodes, and maybe some other different internals to 'rebuild' my larger output model using the main body should mine pack up??. I am not sure about the transformer output of the 20/25 as it's a Satronic and not a May & Christie which is on mine.
Do transformers need to be 'matched' exactly to each size of burner?
Any advice at all would be much appreciated, as I don't want to pass up on this 2/25 if much of it could be used on mine in the future!.
Regards, and thanks, Richard