Discuss Trappex Freebie pump rotation tester in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Currently Trappex Centramag have teamed up with a new boiler manufacturer called Motan boilers .Motan boilers make it mandatory a Trappex Centramag filter is fitted on there system otherwise the warranty is void.They are the first boiler manufacturer that have made fitting a filter mandatory ,I am sure others will follow .

Kober??

saw them at ish in 2011 and 2013

nice and simple, logical design with plenty of room.
 
Motan boilers have been set up by 2 plumbers from Harrogate ,I hope they do well .I take my hat to somebody who gives it a go !!!!!!!
 
Motan boilers have been set up by 2 plumbers from Harrogate ,I hope they do well .I take my hat to somebody who gives it a go !!!!!!!

Hmm arnt they just retailers/importers?
my conversations with the lovely ladys at ISH was that they were romanian boiler manufacturers?
 
They have the UK Franchise for Motan Boilers, but they are giving a 7 year warranty off there own back .Marketing and warranty cover is down to the them not the Romanian manufacturer. They have started to sell a lot of the Motan boilers and they are not cheap.
 
My only gripe about them was the packaged unvented that goes below it with a 5 par prv.

otherwise they looked decent.
 
This shows the pump is spinning,I have got one in my tool box .

I have a number of these from different companies as freebies. It does not show that the pump is rotating it shows that there is power to the pump and the coil is energized making a magnetic field which is why the disc in the middle spins. The impeller in the pump should revolve but if it is jammed there will still be a magnetic field produced. That said it can still be a handy gadget to have. I keep 2 on my keyring.
 
Well my trappex freebie arrived today. It looks...simple. Am excited to give it a go. Thanks feller

20140205_213415.jpg
 
New posts
Status
Not open for further replies.

Reply to Trappex Freebie pump rotation tester in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

    • Like
Hello, my Mothers heating failed in the recent UK cold snap. I found the pump was stuck. I have a question about pump orientation. The...
Replies
8
Views
673
    • Like
  • Locked
Hi all, Currently undergoing my level 2, hoping to get finished in the next few weeks. Looking to gain some experience, if anyone needs a mate...
Replies
1
Views
267
    • Like
  • Article
The UK Government has today been told to do better when it comes to Heat Pumps and Hydrogen Boilers. A watchdog for spending has said that the...
Replies
0
Views
475
Just an update to anyone who was following the thread on this site: Tify to gas engineer, what will it take? I got a DM from a user asking for an...
Replies
2
Views
453
S
Happy New Year everyone! I need a little help on figuring out what's wrong with my central heating (CH) system. I'm in a new house, and I know...
Replies
6
Views
852
Sam Wain
S
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock