Search the forum,

Discuss Toilet constantly making a flushing noise in the DIY Plumbing Forum area at PlumbersForums.net

Messages
31
Hi, in my en-suite I have a toilet that is constantly making a flushing noise and water is dribbling in too the pan what do I need to stop this? I have some photos
 

Attachments

  • 21709BD6-A0E9-44E1-9E00-74955E2B8667.jpeg
    21709BD6-A0E9-44E1-9E00-74955E2B8667.jpeg
    328.6 KB · Views: 11
  • FE684601-C8EF-4AAF-94D6-DC31257FE30F.jpeg
    FE684601-C8EF-4AAF-94D6-DC31257FE30F.jpeg
    337.4 KB · Views: 9

Reply to Toilet constantly making a flushing noise in the DIY Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
524
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
148
The left rear floor corner is highest (the shower pan touches/sits on the floor), sloping down diagonally to the front right corner (lowest). The front right corner shim is 5/8", the left front corner is 3/8" shimmed, with shorter shims under left middle and right rear corner. The pan perimeters...
Replies
5
Views
149
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
140
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
268
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock