Discuss Titan Quadrant Shower Rollers in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

mcheenan

Does anyone know where I could buy a roller for a 10 year old Titan Quadrant shower? They look as though they're made from copper but the brand doesn't seem to exist any more. Alternatively, is there a substitute that would work? Everything works but this! Thanks
 
Hi There
It sounds like we may have the same shower "Titan" and I am also looking for rollers. I have taken pics, and as you say, mine are copper also.

Just joined so I dont know if I can attach pics, if you know about attaching, or better still, have you found the rollers, I would be grateful
 
Status
Not open for further replies.

Reply to Titan Quadrant Shower Rollers in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
464
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
241
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
562
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
331
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
326
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock