Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Tigerloop drawing to much air in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Gazzt

Esteemed
Messages
191
A top outlet tank with a tigerloop, the tigerloop is bubbling slot. So I primed it using a dish of oil and the ran fine, but when connected to the tiger loop there seems to be to much air. I checked connections and they seem tight and sealed with fuel seal red stag. Any advice welcome please
 

Reply to Tigerloop drawing to much air in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
421
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
373
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
310
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
226
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
203
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock