Search the forum,

Discuss System design question. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
3
Hi All,
My name is Mariusz. Im new to the forum and I can see already that I found a place for me. I'm working on a project bigger than I ever had and I'm planning my boiler room.

I have 3 storage house where first and second floor has 108m2 and loft around 60m2, where all will be UFH where manifolds have own pumps. I do also have there 7 bathrooms.
System also requires 7 towel rads and about 5 other rads.

I'm planning to install 2 Vaillant 630 system boilers and two 300 leters cylinders as well as low loss header where I was advice by Vaillant that WH40 is right for my two boilers.

Im looking for some information where I can taught myself and be able to calculate certain bits but it looks very complicated.
For example to size low loss header I would need to flow volume which I don't know how to figure out. I also would like to calculate my secondary pump where I think I'll need one.

Thanks for any advice
 
I may have to but I do like to understand things myself. I'm not asking for ready info but for resources I could start to teach myself.
Thanks
 
7 bathrooms and only 5 other rads ??????????

sounds like a standard house
 
Fun my arse.

You're not going to pick up what you need in a few hours of looking at a book or on the internet.

Time to employ a consultant or design engineer and work with them.
 
Fun my arse.

You're not going to pick up what you need in a few hours of looking at a book or on the internet.

Time to employ a consultant or design engineer and work with them.

Esp with 7 bathrooms

Small hotel :D
 

Reply to System design question. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
97
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
139
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
113
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
425
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
178
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock