Discuss speed fit on secondary return in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
the manufacturers don"t say not to use it they say don"t use it on a continuously circulating return maintained at a constant high temperature, I f you're gonna quote the manufacturer at least take the time to read it and get it right!
 
Insurers will be more happy with leakage from sealed domestic CH system, as its un-likely to flood downstairs.

Un-like 3 bar (mains-fed) hot water , plenty of potential damage .

A good reason for G3 ticket , and a service once in a while !
 
You lot still arguing about this?!?

It's Sunday evening, who gives a tish!!!
 
Personally, I'd say mike Jackson got it spot on. It's not been approved for the relevant specification because its not worth the bothering financially.

Doubt it makes any odds, I'd be surprised if it wasn't tested for 24/7 use. Plenty of applications where heating could be on continuously and for them to release a product that couldn't withstand 'worse case scenario' would be utterly stupid.
 
G3 doesn't make any mention of hot water returns in plastic, I"d love to know how you service a plastic pipe?
 
don"t use it on a continuously circulating return maintained at a constant high temperature,

My point is ,compare years to failure if constant
with how many more you will get if its not constant . ( Warranty period ? )

Insurers don't like paying for gamblers !

( Have not read instructions as I don't fit )
 
I"ll choose to ignore it as I dont do nursing homes

I don't do nursings homes but I have clients that are from the Middle East. Usually seven+ bedrooms and bathrooms with servants quarters. They all come and go at different times throughout the year and the set up suits their lifestyle/needs.

Would you plumb the secondary return in plastic?
 
Last edited:
Status
Not open for further replies.

Reply to speed fit on secondary return in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
I'm a plumbing novice so first of all I apologise if I'm not explaining this situation correctly. I've recently renovated a house for my family to...
Replies
14
Views
2K
    • Like
As recommended by the welcome email, hello all, my name is James Pirie and I am not a plumber but a keen DIY enthusiast mostly due to the severe...
Replies
4
Views
451
Hi Everyone, For those who like a long read but I could rally do with some advice. Might be a bit long this. For background. A...
Replies
3
Views
286
just put a new pop up waste into my basin to find the trap does not fit correctly.. the trap fits just inside the waste thread opening and butts...
Replies
7
Views
873
Hi All, Looking for a bit of advice on the best way to pipe this. - 24kW Worcester regular boiler in kitchen, approx. 9 years old - unvented...
Replies
16
Views
1K

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock