Search the forum,

Some Advise Please...

Post new thread

Discuss Some Advise Please... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

MorrG

Messages
37
Hi, I have a few questions about the different qualifications you can get as I am unsure what I should be working towards, does anyone here know if a City & Guilds level 2 Diploma in Plumbing is the same as (or equivalent to) an NVQ level 2? I have been trying to find out the differences between the two but I am still non the wiser about it all :disappointed: Also would I be able to start work after completing my Level 2 Diploma and (if I am) would it be worth spending another year completing the Level 3 Diploma? Any help would be great :stooge_curly:
 
I have read through a few of the topics in this thread and some of my questions have already been answered. From what I understand after completing the level 2 diploma I will need to have somebody visit me on site to gain my NVQ, is that correct? It seems a lot of people have had difficulties finding work off the back of completing their level 2 but I suppose it's worth the risk.
 
Status
Not open for further replies.

Reply to Some Advise Please... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
107
Lou
Lou
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
317
Chuck
C
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
181
mutley racers
M
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
117
Lou
Lou
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
248
oz-plumber
O
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock