Search the forum,

Sime Murelle HE300 not getting to temperature

Post new thread

Discuss Sime Murelle HE300 not getting to temperature in the Central Heating Forum area at PlumbersForums.net

B

Barrie Cairnsmore

Messages
2
Hi, have a Sime Murelle HE30 boiler on traditional CH 15 rads plus hot water tank circuit. Boiler gets to about 60 then modulates, drops to 50 ish but fails to reach demand temp of 75. Pressure is ok (although could do with a bigger expansion vessel). It was fine last week! Any ideas?
 

Reply to Sime Murelle HE300 not getting to temperature in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
140
Lou
Lou
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
232
oz-plumber
O
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
344
Chuck
C
R
squeaky grohe bathroom tap 2 months old
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes a squeak noise as I turn it on or off, left tap is 100% perfect and noiseless. This grohe tap is like one unit, so no screw notch or way I can remove...
Replies
4
Views
160
Raff
R
Creating content since 2001. Untold Media.

Newest Plumbing Threads

UK Tiling Forums
Tilers' Talk
Tilers Forums UK
Tiling Blog
Tiling Forum UK
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock