Search the forum,

Discuss side flues?? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
E

emerald

hey guys, i need to price to replace a glowworm ultimate 30ff, it has a side flue, as the location is really tight and the guy wants it in the same place, i need another boiler with a side flue, are there any availiable? my merchants couldnt find one

cheers
Emerald
 
had a quick look, that boilers flue exits the top of the boiler, im after a side flue, seem to remember the fitting the glow worm one when i was an apprentice, where you spin the fan to face the exit you want to use, or something like that
 
that sounds like a micron cant fit one nowadays , all that springs to mind is the logic but that only goes rear , you will have to core a new flue hole atop i,m afraid.
 
cant go any higher with the flue as there is a RSJ in the way, and the boiler cant come down as there is a worktop in the way, think im gonna have to go and look again, may have to go vertical, through the corner ov a hall above, and then out, or get him to reposition
 
Status
Not open for further replies.

Reply to side flues?? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
261
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
172
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
180
  • Article
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was prosecuted after Hereford Trading Standards Team found that he was falsely claiming to be on the Gas Safe Register when he was not, putting members of the...
Replies
0
Views
215
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
237
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock