Search the forum,

Discuss Shower Power Booster in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Rob Foster

Esteemed
Messages
2,083
The last time this appeared here was in 2014. I intend to fit one maybe 2 to my narrow boat. Is there any more experience of these units post 2014 ?
Many thanks Rob Foster aka centralheatking
 
Ive fitted some. Work reasonably well. Just dont expect miracles. Best placed just before tap or shower being boosted. Ive always put two in. Always been very quiet & reliable.
 
The last time this appeared here was in 2014. I intend to fit one maybe 2 to my narrow boat. Is there any more experience of these units post 2014 ?
Many thanks Rob Foster aka centralheatking

What you got Rob, trad, semi trad? Sorry if I`ve asked before.

Ive fitted some. Work reasonably well. Just dont expect miracles. Best placed just before tap or shower being boosted. Ive always put two in. Always been very quiet & reliable.

When you say two do you mean two inline Dave so they work like a multistage booster pump?
 
What you got Rob, trad, semi trad? Sorry if I`ve asked before.



When you say two do you mean two inline Dave so they work like a multistage booster pump?

Yes RPM, mounted in series switched in parallel. Not quite same as a multistage, but def a significant improvement on a single
 
What you got Rob, trad, semi trad? Sorry if I`ve asked before.



When you say two do you mean two inline Dave so they work like a multistage booster pump?
Semi trad , all steel, 2 cylinder lister with a blown head at the moment , fixed bedroom. Installing a ro ro unit over the winter ...boats hey love and hate all at same time but better than women in my opinion
Rob Foster aka centralheatking
 
Semi trad , all steel, 2 cylinder lister with a blown head at the moment , fixed bedroom. Installing a ro ro unit over the winter ...boats hey love and hate all at same time but better than women in my opinion
Rob Foster aka centralheatking
Nice, love the sound of an old long stroke Lister and all the copper pipe (If polished lol).
 
Nice, love the sound of an old long stroke Lister and all the copper pipe (If polished lol).
They say that the 2nd best time owning a boat is when you buy it, the 1st is when you sell the ******g thing. This one is my second ...last one was a 20 ft fast day boat for bass fishing off north wales
85 hp motor x2 on back But that went when I sold the defender
As well Rob Foster aka centralheatking
 
Last edited:
Semi trad , all steel, 2 cylinder lister with a blown head at the moment , fixed bedroom. Installing a ro ro unit over the winter ...boats hey love and hate all at same time but better than women in my opinion
Rob Foster aka centralheatking
Seems your PM settings are screwed down tight.
Spotted an ad on fleabay Rob, Lister 15.5hp 2 pot, load of new spares.
Well worth a look.
 

Reply to Shower Power Booster in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
110
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
229
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
249
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
119
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
193
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock