Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Shower Mixer tap feed connection in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
1
While ppl are here I'm also brand new member looking for some info first how do I ask my own question without hijacking someone else's. Second I've fitted a single pump to the gravity fed tank because my hot water was terrible but it keeps drawing air in from tank. I was going to fit a s flange in top but can not fathom how the piping goes as the s flange has 2 outlets. Any help would be appreciated. I know the free from air pipe goes to the pump but where would the top pipe go. Thanks and sorry in advance.

20190327_193852.jpg
 

Reply to Shower Mixer tap feed connection in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
199
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
419
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for...
Replies
1
Views
291
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
244
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended...
Replies
6
Views
279
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock