Shower head connections

Post new thread

Discuss Shower head connections in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

C

Chrisgl

Messages
1
Have a Grohe shower head and struggling to find connections from this to my hot and cold supply pipes…. They fit 15mm threads but the thread is deep and the surface is not flat so am worried about the seal
 

Reply to Shower head connections in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

E
gravity fed upstairs shower pressure question
We have a gravity fed hot water system in our the house we have just recently moved into. It works fine with the downstairs shower, however we are...
Replies
15
Views
791
elmocambo
E
A
Shower problems
Hi all I had a new bathroom fitted about 4 months ago and all was fine until about a week ago. But now when I turn the lever to run the rain head...
Replies
4
Views
218
ShaunCorbs
ShaunCorbs
W
LoxSeal re-use?
I'm at the stage of my shower replacement where I have a new shower head to screw into the wall pipes. I tried it, turned on the shower, and find...
Replies
3
Views
210
W_C_Fields
W
M
Daryl Shower Head replacement (possibly over 30 years old)
First of all I have to confess I am not a plumber so please bear with me! I have a Daryl enclosed shower in an ensuite bathroom. It was already...
Replies
2
Views
320
morrig47
M
W
Is My Shower Cock Stop Leaking ? Can I Change The Ceramic Cartridge ??
i can't tell if my shower tap (cock stop) is leaking or not ...............so after showering, the shower head will drip fast for 2 hours, then...
Replies
0
Views
283
WorsTalentScout
W

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock