P
paulypaul
Hi all,
I have one radiator that does not get warm at all.
I have tried.
No I have removed this radiator to clean with a pressure washer by closing the inlet and outlet and removing the radiator.
For an experiment i turned on the value on one side and good pressure was observer. The other however (with the new CV value) just drips.
Is this normal as i assume one would be the return route?
I hope I have given you all the information needed, your advise would be great!
Thanks,
Paul.
I have one radiator that does not get warm at all.
I have tried.
- Replace cv value
- Close other radiators except this one for a short time (to try an push air lock around)
- System flush with cleaner
No I have removed this radiator to clean with a pressure washer by closing the inlet and outlet and removing the radiator.
For an experiment i turned on the value on one side and good pressure was observer. The other however (with the new CV value) just drips.
Is this normal as i assume one would be the return route?
I hope I have given you all the information needed, your advise would be great!
Thanks,
Paul.