Search the forum,

Sharkbite

Post new thread

Discuss Sharkbite in the USA area at PlumbersForums.net

R

Retired-due-to-injury

Messages
2
Hi All,

Unfortunately, due to an accident, I have had to retire from plumbing and have lots of stock to get shot of.

I have loads of sharkbite plumbing gear which was specified by a builder in London, if anyone is interested please let me know.
 

Attachments

  • Sharkbite 4 Pipe.png
    Sharkbite 4 Pipe.png
    554.4 KB · Views: 4
  • 90-Elbow-LR.jpg
    90-Elbow-LR.jpg
    51.6 KB · Views: 6

Reply to Sharkbite in the USA area at PlumbersForums.net

Similar plumbing topics

D
Cistern filling one third of the way
Hi All, does anyone know why the water only fills 1/3 of the way please?
Replies
4
Views
199
dwaindigital
D
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
244
mutley racers
M
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
250
Firefox
F
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
171
Lou
Lou
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
240
PSxxxxxx
P
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Electrical Forum
TilersForums.co.uk | UK Tiling Forum - Est 2006
UK Tiling News
British Standards in Tiling BS5389
Tiling Tools
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock