Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Second hand radiant gas fire burner pressure problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
:32::speechless::furious3:we dont do diy gas work on this forum,and if you are a gsr you need to question your competency 24mb inlet,whats that gas hob gone out? smell gas by any chance???but you have a electric hob you say,so is that second hand burner doing a jig as well
 
Last edited by a moderator:
what do the notes you got when you did your CCN1, HTR1 and CPA1 say about this type of problem, surely its not that long ago that you passed? you have passed haven't you? surely nobody is so irresponsible as to fit a second hand open flued appliance without being competant and risking the lives of the whole family
 
IT IS AGAINST GAS REGULATIONS TO FIT A SECONDHAND GAS APPLAINCE WITHOUT ITS MANUFACTURES INSTRUCTIONS.

if you do not know this then you dont know what you are doing!
 
Mee, dont take offence mate but this is not a Diy forum.
Its obvious your not an engineer and you are working illegally on a gas appliance.
If you were an engineer the fault is obvious but we cannot condone working on gas appliances illegally and that is why people are getting irate and not giving you the answers you require.

Imagine if something went wrong and it goes to court and you say "such and such on this forum said this is what to do" we would loose our living and that is of course better than you or someone living with you loosing their life.
 
its not really advisable for anyone to give advise that may lead to a dangerous or illegal situation.
 
and when you contact them to tell them dont forget they will require your gas safe number.
 
Muppet hope you get banned

why? this thread is helping prove the point that you need to be competent to work on gas, and its better to contact a Gas Safe registered engineer to ensure you dont harm yourself or others.
 
he has edited all his posts lol obviously not hearing what he wanted to hear
 
Status
Not open for further replies.

Reply to Second hand radiant gas fire burner pressure problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I am troubleshooting a gas hob where one burner is reluctant to light. When it is lit and I blow the flame out the FSD on that burner cuts off...
Replies
2
Views
359
I have an old Modena 80 E combi boiler that is randomly short cycling on windy days. The burner goes out and re-ignites within a few seconds and...
Replies
3
Views
261
Hi everyone, My customer has a gas fire (Gazco Logic HE fire, about 10 years old). It's a slide control fire. The fire has become difficult to...
Replies
1
Views
297
My Worcester greenstar compact burner green light is only firing up for 5 seconds then cutting out. Anyone got any ideas before I call an engineer...
Replies
13
Views
921
I have a portable gas fire which keeps switching off. The pilot light lifts for 10 seconds, critically above the thermocouple and then the gas...
Replies
0
Views
326
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock