Search the forum,

Discuss Rotating Valves / Swivel Bracket for Servowarm Elite Plus Boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

RobLDN

Rotating Valves / Swivel Bracket for Servowarm Supreme Plus Boiler

Hello All,
I have an old Servowarm boiler in my house which was there when I moved in a few years ago. It's the type that's hidden behind a main radiator, which swings open to reveal the boiler. I know these things have a bad reputation, but it's given me good service for the past 6 years I've lived here. Anyway, I recently redecorated the living room where the boiler is, and I had to keep swinging the radiator open to paint around the boiler cabinet. Having just laid the new wooden flooring I noticed the boiler had sprung a leak! It seems to be dripping from the bottom radiator connecting pipe. I managed to drain the system to stop the leak, but am now without any heating. I can't seem to find this part anywhere as I know the boiler is obsolete :disappointed:. I know I should just change the whole system, but can't afford to do that for at least another year. Does anyone know of where I might be able to locate the parts for this? I'd appreciate any help/advice you're able to offer.
Thanks in advance!
Rob
 
Last edited by a moderator:
These parts haven't been manufactured for years. Am afraid it's live with it or replace.

Sorry for the bad news.
 
Servowarm had their own engineers or guys who specialised on working on them. Best bet would be to find one but most have given it up or retired a few years back. They may have a few spares still lying around.
Ring this guy (he's retired afaik) who if he can't help you will be able to point you in the right direction.
Servowarm Maintenance Services~251
 
Sell the old system to a museum, and use the money for a new system. amazing that the old rad/boiler still working. Is it still topped up manually with that vase in the corner.
 
Status
Not open for further replies.

Reply to Rotating Valves / Swivel Bracket for Servowarm Elite Plus Boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
207
P
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
192
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
265
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
213
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
140
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock