Search the forum,

Discuss RHI delayed in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
worrying really, i fear this will stop people geting these new technologies when they may have done if the rhi was never even considered
 
It should be used to encourage investment in alternates, just look how the FIT brought down the costs of PV in quite a short period of time really.
 
Amazing.... Didn't see this coming... Honest!

About time this bunch of knuckle shufflers stopped talking about doing hundreds of things brilliantly and just did anything at all. That would be a start.
We seems to be stuck in a cycle of moaning and broken promises, which then leads to more moaning and debate etc etc.

They are all as bad as each other at the minute.
It feels like we need a complete change, and for something drastic to happen to take our broken political system back to basic to get anything done.
 
Grants have been extended though which for me is better than any tarrif
 
Status
Not open for further replies.

Reply to RHI delayed in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
246
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
225
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
162
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
157
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
381
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock