Search the forum,

replacing thermistors

Post new thread

Discuss replacing thermistors in the Plumbing Jobs | The Job-board area at PlumbersForums.net

W

wet2dry

Messages
3
HI everyone if thermistors need replacing on a boiler who needs to do the work ? plumber ?or registered gas safe i used to be gas safe about 8 years ago ? and was wondering if i can change them !
 
Gas safe engy
 

Reply to replacing thermistors in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

SteveP205
Plumber to replace Mainsboost MJ3 Charger
The MJ3 Charger on my Mainsboost system has stopped working and I have sourced a replacement, but need a plumber that understands these installations to come and replace that unit and ensure it's commissioned properly. Let me know if you've worked with this system before and can quote on...
Replies
0
Views
332
SteveP205
SteveP205
C
baxi duotec e50 boiler error
Hi, I'm hoping someone here may be able to help me out with an issue I have with my baxi duotec boiler. Basically, the hot water temperature has been fluctuating quite alot, dropping in temp then raising again whilst showering. I have had an engineer out who has changed the thermistor, but I am...
Replies
5
Views
434
cjg
C
siricosm
Boiler replacement in Norwich
I need someone to replace my boiler, I am thinking to get an Intergas HRE 24 SB. Our current boiler (and old Ideal) is in the kitchen, and we would like to relocate it to the laundry room or loft, so a new gas line needs to be run. I would prefer someone local in Norwich that can also do the...
Replies
0
Views
335
siricosm
siricosm
A
    • Like
  • Locked
Combi Boiler Install in Devon, Exeter.
Hi, I recently fitted a new central heating circuit and ran hot and cold to the bathroom and kitchen in my property (I was a CORGI registered central heating installer about 15 years ago, so I felt comfortable running the flow/return to rads). I am in need of a combi boiler install with a...
Replies
0
Views
468
Aaron111
A
V
  • Question
Gas Boiler service Cost
Hi All, what's the cost of a service for an unvented system ? (valiant boiler & mega flow cylinder). I was charged £320.00, for the following: Boiler service - no parts changed. Change wireless thermostat (honeywell to Tado), I supplied the thermostat starter kit. is that about correct ? Also...
Replies
2
Views
404
Vincent-vega
V
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock