Replacing Danfoss Thermostat RMT230 with TP7000M...wiring?

Post new thread

Discuss Replacing Danfoss Thermostat RMT230 with TP7000M...wiring? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

bobby55

Hi All,

I'm looking at replacing my heating thermostat, I currently have a Danfoss RMT230 and would like to replace it with a digital version probably a Danfoss TP7000M. Just need wiring confirmation.

I currently have the following:-

1 = Brown (Live)
2 = Black with brown sleeve
3/4/5 = nothing
Earth is connected to earth, I also have a grey wire which is connected to nothing but in its own connector block.

So would a TP7000M be wired as follows?

1 & L = Brown (live)
2 = Black with brown sleeve
3/4/5 = nothing
Earth is connected to earth
Grey left with own connector block

Any help much appreciated ;)

Attached wiring diagrams ;)

Regards,
Bobby55

View attachment wiring.zip
 
Status
Not open for further replies.

Reply to Replacing Danfoss Thermostat RMT230 with TP7000M...wiring? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
338
DIwhYdidIstartThis
D
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
478
Chuck
C

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock