Discuss Replacing a Keston C36 - The worlds worst boiler? in the Central Heating Forum area at PlumbersForums.net

Hi Guys,

I am the miserable owner of a Keston C36 boiler. It has had EVERYTHING on it replaced.

My questions is, what do I replace it with and can it be done without replacing the entire flue. The dual flue is at least 10m long and has a couple of 45 degree turns in it. Am I going to need scaffolding on the outside of the property if a new one is to be installed, will I need to rip out half of my ceiling to put in inspection shafts?

I had a quote a few years ago from a company who were going to put in an Ideal Logic C30 and they were asking for over £6K. I have just tried to keep the boiler going since then and have still not found a viable option for replacing it. I am based in east london.

Any advice would be much appreciated.

Sean
 
Hello Sean,

Yes, the flue would nee to be replaced entirely, even if you were to replace with another Keston. If the flue is concealed, the inspection hatches are required. Is there an option to relocate to boiler?
 
Hello Sean,

Yes, the flue would nee to be replaced entirely, even if you were to replace with another Keston. If the flue is concealed, the inspection hatches are required. Is there an option to relocate to boiler?
Hi Chris,

Thanks for the reply. It's not possible to relocate the boiler. I don't know the regulations well enough but I can see about half way down the flue from the current inspection shaft. A second or third one is what I'm probably going to need if a new flue is going in. My management company are utter bastards and are probably going to make it very expensive to get the permission to put scaffolding up on the outside (for sorting out the exit of the flue). What boilers should I be looking at for this sort of job?

Sean
 
Any combi boiler you want really, providing the gas pipe size is correct and you can get the flue sorted. Probably best engaging with a local engineer and having a chat with them as they’ll be able to best advise you.
 

Reply to Replacing a Keston C36 - The worlds worst boiler? in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

Had our gas Baxi Combi inspected and serviced today, as it has been every year. Gas safety cert issued and says all okay, but engineer gave what I...
Replies
4
Views
586
We live in a 1980s four-bedroom detached house. The time has come for new central heating. The current system is a mild revision of the original...
Replies
13
Views
2K
I have a 3 port valve Y plan system, with a hot water tank in airing cupboard and a cold water feeder tank in loft. I want to replace the old 25+...
Replies
13
Views
2K
I have a conventional system, Potterton Prima Boiler, into a Pump into a Motorised Valve that feeds the Radiators and/or the pipes in the Hot...
Replies
4
Views
524
Good afternoon everyone. I'd really appreciate some advice here on a boiler issue. I am being advised to replace my 5 year old Keston C55. I am...
Replies
9
Views
2K

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock