Search the forum,

Discuss Replacement Grohe mono block in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
3
How can i buy an exact replacement as i cannot see how to open the barrel to the hot ceramic disc to replace that?

Grohe
About 8 years old.

Thanks
Chris

20190531_131058.jpg


20190531_203413.jpg
 
Doh.
I pulled, pushed then I twisted the handles and looks like I have broken the cold tap as it now spins right round and still the blessed thing is closed tight.
Time to see if I can fit a new tap.
The problem is that I have very little access and wanted to fix what I had.
 

Reply to Replacement Grohe mono block in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes...
Replies
7
Views
460
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
262
PSxxxxxx
P
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a...
Replies
2
Views
336
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't...
Replies
6
Views
340
P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator...
Replies
2
Views
125
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock