Search the forum,

Replacement for this...

Post new thread

Discuss Replacement for this... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
V

Vinod

Messages
17
Hello All,

Anyone have any recommendations for a replacement for the below tank.

Cheers




20171108_095952.jpg
 
Depends on water pressure either an unvented cylinder or a normal tank feed cylinder
 
no gas only electric in this flat. They have economy 7
Thinking a direct combination economy 7 cylinder
 
It made me think asbestos when I saw it !
It may just be that the look reminded me of Boilers lagged in pig muck. It may be something completely innocent. Worth a mention though.
 
Elson unit as mentioned above. Covered in insulation then hardboard. E7 combination unit or unvented. I'm guessing your hot water pressure is quite bad?
 
Status
Not open for further replies.

Reply to Replacement for this... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
293
oz-plumber
O
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
118
Lou
Lou
D
Replacing outdoor P-Trap Gully with Bottle Gully
Hi all, I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the sink, dishwasher, washing machine etc. When I pour the concrete there won't be any chance to dig it up anymore. From my own research I get the...
Replies
0
Views
94
DIwhYdidIstartThis
D
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
224
oz-plumber
O
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
133
fowlerboi
F
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock